WasteCare Corporation is your source for commercial trash compactors, balers, waste equipment, recycling equipment, industrial shredders and grinders, and other waste related products and services.
STATIONARY COMPACTORS
Reference Guide
Seven Categories and over 15 Models Plus a Variety of Options
From Standard to Extra Heavy Duty Depending on Trash Profile and Needs
Stationary Compactors are ideal for:
- Office Complexes
- Manufacturing Facilities
- Department Stores
- Restaurants
- Chain Stores
- Hospitals
- Motels
- Hotels
- Many other Industrial and Commercial applications.
Basic Categories to Choose From:
2 Cubic Yard Stationary Compactors
3 Cubic Yard Stationary Compactors
4 Cubic Yard Stationary Compactors
5 Cubic Yard Stationary Compactors
7 Cubic Yard Stationary Compactors
10 Cubic Yard Stationary Compactors
12 Cubic Yard Stationary Compactors
Note: Our Trash Compactors - Preliminary Considerations Checklist may be helpful
Stationary Compactors are available in many standard sizes that can also be configured to meet your specific needs. By choosing from a large selection of standard options (such as various hoppers, walk-on or drive on ramps, multi-cycle timers, remote stations and many others) you can tailor a compactor for your circumstances.
Stationary Compactors are typically used for dry waste (i.e. for compacting cardboard and mixed paper etc) and can be positioned so that they are fed by a chute opening that is as simple as a thru-wall arrangement (so that employees do not have to walk outside to make the trash deposits) or fed by an existing air handling system. Unlike Self Contained Compactors, Stationary Compactors compact trash into a detachable Container (such as a 30 yard or 40 Yard Container). Stationary Compactors are designed and built with versatility and durability in mind and are ideal for a large variety of commercial and industrial applications. The quality and compaction force that is provided in both the standard and high density models is tops in the industry. Stationary Compactors can also serve as good Cardboard Compactors or paper compactors, (although not nearly as good as one of our Cardboard Balers).
When trying to decide on the best alternative for a Stationary Compactor, below is a basic checklist for both Standard specifications and features to consider as well as Options:
Standard Specification Considerations:
- Charge Box Capacity
- Clear Top Opening
- Cycle Time
- Total Force (Normal & Maximum)
- Total Face Pressure (Normal & Maximum)
- Operating Pressure (Normal & Maximum)
- Ram Penetration
- Motor Size
- Cylinder Bore Size, Cylinder Rod Size and Strok
- Construction of the Floor, Sides, Breaker Bar, Ram Face, Ram Top, Sides and Bottom
Stationary Compactors - Types of Standard Features to consider:
- UL Listed
- Meets of Exceeds ANSI Z245.5 and OSHA Standards
- NEMA 4 weather proof gasket control panel
- Key Start - Push Button - Control Station mounted on 15' Sealite
- Right or left side mounted power unit
- Power unit weather cover
-
Override - Packout - Hydraulic Pressure Boost
Stationary Compactors - Typical Options to consider:
- Dual Cylinder for High Density Compaction
- Different Motor Voltages (such as 575 volt) and Larger HP Motors
- 3-Sided Hopper (Left or Right Feed)
- 4-Sided Top Hopper
- Walk on Dock Mounts with Hopper & Hand Rails
- Drive on Dock Mounts with Hopper & Hand Rails
- Walk-On Dock Mounts with Safety Gate Hopper & Hand Rails
- Drive-On Dock Mounts with Safety Gate Hopper & Hand Rails
- 10,000 lb Drive on Docks
- Remote Power Unit
- Remote Control Panels (with varying length Hydraulic Hoses)
- Additional Keyed Start / Stop Remote Push Button Station on 15’ Sealite
- 75% Full Advanced Warning Light
- Multi-Cycle Timer
- Low Oil / High Temp Light
- 5’ Guide Island
- Oil Heater
- Weatherproof Control Panel
- Hand Rails
- Interlocks for Safety Gates